Loading... Please wait...
  • Image 1
  • Image 2
  • Image 3

M10 2 Channel Mixer

$229.00

Product Description

 
 
-   2-Channel Tabletop Mixer
-   Input: Line x 4 (RCA), Phono x 2(RCA), MIC x 1 (6.3mm x1)
-   Output: Unbalanced (RCA) x1, Record (RCA) x1, Fader Start Control Out x 2 (3.5mm)
-   Three-band EQ with Full output kill for each channel
-   2-band equalizer for microphone
-   Talk over for microphone
-   High quality replaceable crossfader with 2 curve
-   Crossfader Start compatible with VOXOA CD/MP3 Player
-   Channel fader reversible
-   Crossfader style cueing control
-   Dual 10 LED monitor display (selectable PGM 1/2  or Master output)

 

 3-Band EQ with Kill Function

Every channel of M10 has independent 3-Band EQ knob control and EQ kill function (the kill function allows complete EQ audio frequency volume turn-off for special sound effects).

m10-eqkill.jpg

 Fader Start Function

The Fader Start function can increase the accuracy and efficiency of cross-fading. When the Fader Start function is engaged, the CD/Mp3 Player can be immediately started and paused by the crossfader In order to activate the Fader Start function, M60 must be linked with a compatible Fader Start CD/Mp3 player such as VOXOA’s P70, P60, or P30.

m10-faderstart.jpg

 2 Fader Curve Modes and Curves  

A crossfader curve adjustment on a mixer allow you to gradually alter the way how fast a crossfader will cut in the second sound.

m10-crossfadercurve.jpg

 

Product Model M10 , 2-channel Mixer
Power DC6V, 2A
Size 235mm (W) X 287mm (D) X 106.4mm (H)
Weight 1.65kg
Sound Specification

* INPUT/OUTPUT IMPEDANCE & SENSITIVITY:
   (MASTER 0dBV OUTPUT, LOAD=100KOHM, MAX. GAIN, EQ FLAT)
      LINE:     10K OHM /-14dBV (200mV) +/-2dB
      PHONO:      47K OHM /-50dBV (3.16mV) +/-2dB
      MIC:      1.5K OHM /-54dBV (2mV) +/-2dB
      MASTER:    1K OHM
      PHONES (load=32 ohm) :  33 OHM /0dBV (1V) +/-2dB
 
* FREQUENCY RESPONSE: (MASTER OUTPUT, EQ FLAT)
      LINE:         20-20KHz +/- 2dB.
      PHONO:       20-20KHz +2/-3dB (RIAA)
      MIC:        20-20KHz +2/-3dB
 
* THD + N: (MASTER 0dBV OUTPUT, MAXIMUM GAIN, w/ 20kHz LPF)
      LINE:        LESS THAN 0.05% 20-20KHz
      PHONO:         LESS THAN 0.1% 20-20KHz (IEC-A WTD)
      MIC:        LESS THAN 0.2% 20-20KHz (IEC-A WTD)
      PHONES:     LESS THAN 0.1% 20-20KHz (FROM LINE INPUT)

 * MAXIMUM INPUT: (1KHz, MASTER OUTPUT, THD=1%, EQ FLAT, MAXIMUM GAIN)
      LINE:         MORE THAN +4dBV
      PHONO:       MORE THAN -32dBV
      MIC:         MORE THAN -42dBV
 
* MAXIMUM OUTPUT: (THD=1%, MAXIMUM GAIN, EQ FLAT)
      MASTER:     MORE THAN +18dBV (8.0V) at load=100K OHM
      PHONES:        MORE THAN +4dBV (1.6V) at load=32 OHM
      REC:           MASTER Max. OUTPUT -10+/-2dB at load=100K OHM
 
SN RATIO: (MAXIMUM GAIN, MASTER 0dBV OUTPUT, EQ FLAT, W/20KHz LPF, A-WEIGHTED)
      LINE:      LESS THAN -80dBV
      PHONO:       LESS THAN -70dBV
      MIC:        LESS THAN -60dBV
 
*  CROSSTALK: (FROM MASTER OUTPUT,A-WEIGHTED)
      LINE/PHONO :   MORE THAN 65dB AT 1K Hz BETWEEN L AND R
                                   MORE THAN 65dB AT 1K Hz BETWEEN CHANNELS.
 
*  MIC Talkover:      -14dB+/- 2dB

*  EQ:
              MIC:    HI:         12 +/- 2dB AT 10KHz
                                         - 12 +/- 2dB AT 10KHz
                         LOW:    12 +/- 2dB AT 100Hz
                                         - 12 +/- 2dB AT 100Hz

        Channel:   HI:          10 +/- 2dB AT 16KHz
                                         - 21 +/- 3dB AT 16KHz
                         MID:      10 +/- 2dB AT 1KHz
                                        - 22+/- 3dB AT 1KHz
                         LOW:    10 +/- 2dB AT 60Hz
                                        -22 +/- 3dB AT 60Hz         

               Kill:    HI:            -21 +/- 3dB AT 16KHz
                         MID:         -22 +/- 3dB AT 1KHz
                         LOW:       -22 +/- 3dB AT 60Hz

* FADER MAXIMUM ATTENUATION:
     CHANNEL FADER:      LESS THAN -70dB at 1KHz
     CROSSFADER:     LESS THAN -75dB at 1KHz
 
* CHANNEL BALANCE:     Within 3dB

* CROSSFADER CUT IN POSITION:     1.6mm +/- 0.5mm

 

 







Warranty Information

12 Months Warranty

Other Details

INFO:

Product Reviews

Write Review

  1. good stuff 4 Star Review

    Posted by on 2nd Oct 2014

    its a no brainer for the price! verity well built. encoders and faders have a nice feeling and resistance. i would definitely recommend this product to someone looking for a basic personal mixer.

  2. Good value 4 Star Review

    Posted by on 12th Apr 2013

    A really decent mixer.. better quality than i expected, nice and simple. Nice layout to use. Xfader feels ok too. I wonder if i can put in innofader??

Quantity:
Availability:
none